Installation of electric motor with bore well!!!!
18-Jul-2010: As mentioned previously, the problem of the existing borewell not working with the electric motor installed for drawing the water was taking too much time to be solved. We were always thinking that the reasons for such a long delay in getting this resolved will be known only best to HIM. Today, HE possibly wanted to highlight those reasons to us!!! Firstly, the initial bore well that was dug out in the site last year around Sep time frame was for around 250ft. on the fear that even though water was available at around 30-35 ft. what will happen if the water table receeded much below? However, after doing this digging to around 250 feet and laying the pipe, we just thought that the filter for the bore can be just dropped to just 50 feet and not to be dropped for the entire 250 ft. This proved to be the problem (?) now since the loose mud which was prevailing in that area had gone under to a height of 250 ft from around 50 ft. below the ground level. This made the pipe...